Generic Made In USA Running Line
Specifications Technical Data
Length 48.03 Width 7.09
Thickness 5mm Wear Layer 20mil (12mil-SE)
Finishing Wood Emboss Edge Description Micro Bevel
Sqft/Box 23.64 lb/Box 40.0
Box/Plt 55 Sqft/Plt 1300.2
lb/Plt 2230 Plt/20'FCL 20
Limited
Residential Warranty		 Lifetime Limited
Commercial Warranty		 15Years
No. Description Method Standard Result Performace Rating
1 Packing Appearance Internal Pallets/Cartons/Labels/Inserts/Bar Codes match customer order in quality and quantity, with neat appearance. Pass Better
2 Product Appearance Internal Material must match customer order. No print film folding, no rough bevel, no bevel with white line, no film scratch or breakage, no color difference, no wear layer bubbles, no impurities, no stains, no dents, no scratches, no broken corners, no fish eyes, no trash, no holes, no hair/ foreign subject, no overhang or uneven backpad, etc. Laser print of date/PO# and crew# present. Pass Better
3 Dimensions Length
Width		 ASTM F1700 ± 0.40 mm
± 0.10 mm		 0.03mm
0.02mm		 Best
Best
4 Overall Thickness ASTM F1700 ± 0.10 mm 0.02mm Best
5 Squareness Length
Width		 ISO 24342 ≤ 0.25 mm
≤ 0.25 mm		 0.03mm
0.02mm		 Best
Best
6 Straightness Length
Width		 ISO 24342 ≤ 0.25 mm
≤ 0.25 mm		 0.05mm
0.01mm		 Best
Best
7 Stitching Gap (mm) EN13329 ≤ 0.10mm 0.02mm Best
8 Height Difference EN13329 ≤ 0.10mm 0.03mm Best
9 Wear Layer Thickness EN 429 ± 0.02 mm 0.01mm Best
10 Peel Strength of Adhesive Bonds ASTM D903 ≥5.5Lbs/Inch 10.3Lbs/Inch Best
11 Scratch Resistance EN 16094B > 2500g 4,000g Best
12 Micro-Scratch Resistance (A & B) EN 16094 MSR-B1 - B3 MSR-B2 Better
13 Coating Adhesion (Cross hatch) EN 16094B 5B 5B Best
14 Abrasion Resistance of Organic Coatings by the Taber Abraser ASTM D4060 No pass-fail criteria Abrasion Wheel H-18 Load Applied 1000 Grams Number Of Cycles:14000 Best
15 Determination of Locking Strength for Mechanically Assembled Panels ISO 24334 ≥2KN/M Long Side 5.6 KN/M Short Side 3.1 KN/M Good
16 Determination of Dimensional Stability and Curling after Exposure to Heat (6h - 176F) ISO 23999 ASTM F3261 Length mean ≦0.25％ Width mean ≦0.25％ Length mean =0.02％ Width mean =0.04％ Best
17 Wear Layer Abrasion Resistance EN 13329 (S-42, 200 cycle change) 0.3mm wear layer IP≥1,800 cycles; 0.5mm wear layer IP≥4,000 cycles. No abrasion through wear layer into print film upon cycle completion. Better
18 Density ASTM D2395 1.9-2.2g/cm³ 1.98g/cm³ Good
19 Phthalates CPSC-CH-C1001-09.4 GC-MS analysis each substance ≤ 50ppm < 1.0pppm Best
20 Heavy Metal Content Analysis ASTM F963 Antimony < 60 ppm, Arsenic < 25 ppm, Barium < 1000 ppm, Cadmium < 75 ppm, Chromium < 60 ppm, Lead < 90 ppm, Mercury < 60 ppm, and Selenium < 500 ppm All < 0.25ppm Best
21 Gloss Level (gu) ASTM D523 ±2gu < ±2gu Good
22 Resistance to Chemicals ASTM F925 0 - No change (----) 1 - Slight change 2 - Moderate change 3 - Severe change 0 No Change Good
23 Determining Resistance of Synthetic Polymers to Fungi ASTM G21 Rating 0: No Fungal Growth on Sample Rating 1: Trace of Growth (< 10% coverage) Rating 2: Light Growth (10-30% coverage) Rating 3: Medium Growth (30-60% coverage) Rating 4: Heavy Growth (60-100% coverage) Rating 0, No Fungal Growth on Sample Best
24 Smoke Density (Non-Flaming) ASTM E662 ≦450 291 Best
25 Smoke Density (Flaming) ASTM E662 ≦450 237 Best
26 Calculated Sound Transmission (STC) ASTM E90-09 (2016) ASTM E413-16 No pass-fail criteria 52 Good
27 Impact Sound Reduction (IIC) ASTM E492-09 ASTM E989-18 No pass-fail criteria 62 Good
28 Short-Term Indentation and Residual Indentation of Resilient Floor Covering ASTM F1914 ASTM F3261 ≤ 0.007 inch Surface Integrity: No puncture through wear layer/print film into rigid core. 0.002 inch No puncture through wear layer/print film into rigid core. Best
29 Static Load Limit ASTM F970 Max loading: 250psi Max residual indent: 0.005 inch 0.003 Inch @ 250psi Good
30 Heat Stability of Resilient Flooring by Color change ASTM F1514 < 8.0 ΔE 0.05-0.19 ΔE Best
31 Light Stability of Resilient Flooring by Color change ASTM F1515 < 8.0 ΔE 0.29-0.46 ΔE Best
32 Static Coefficient of Friction ASTM C1028 ≥ 0.60 for dry surfaces ≥ 0.53 for wet surfaces Dry 0.69 Wet 0.56 with 50lbs load Good
Generic Made In China Running Line
Specifications Technical Data
Length 48.03 Width 7.17
Thickness 5mm Wear Layer 12mil
Finishing Random EIR Edge Description Micro Bevel
Sqft/Box 28.68 lb/Box 49.4
Box/Plt 55 Sqft/Plt 1577
lb/Plt 2745 Plt/20'FCL 20
Limited
Residential Warranty		 Lifetime Limited
Commercial Warranty		 10Years
No. Description Method Standard Result Performace Rating
1 Packing Appearance Internal Pallets/Cartons/Labels/Inserts/Bar Codes match customer order in quality and quantity, with neat appearance. Pass Better
2 Product Appearance Internal Material must match customer order. No print film folding, no rough bevel, no bevel with white line, no film scratch or breakage, no color difference, no wear layer bubbles, no impurities, no stains, no dents, no scratches, no broken corners, no fish eyes, no trash, no holes, no hair/ foreign subject, no overhang or uneven backpad, etc. Pass Better
3 Dimensions Length
Width		 ASTM F1700 ± 0.40 mm
± 0.10 mm		 0.03mm
0.02mm		 Best
Best
4 Overall Thickness ASTM F1700 ± 0.10 mm 0.02mm Best
5 Squareness Length
Width		 ISO 24342 ≤ 0.25 mm
≤ 0.25 mm		 0.03mm
0.02mm		 Best
Best
6 Straightness Length
Width		 ISO 24342 ≤ 0.25 mm
≤ 0.25 mm		 0.05mm
0.01mm		 Best
Best
7 Stitching Gap (mm) EN13329 ≤ 0.10mm 0.02mm Best
8 Height Difference EN13329 ≤ 0.10mm 0.03mm Best
9 Resilient floor covering Determination of peel resistance EN ISO 24345:2012 ≥54N/50mm Longitudinal direction: 95N/50mm Cross direction: 95N/50mm Best
10 Scratch Resistance EN 16094B > 2500g 4,000g Best
11 Micro-Scratch Resistance (A & B) EN 16094 MSR-B1 - B3 MSR-B2 Better
12 Coating Adhesion (Cross hatch) EN 16094B 5B 5B Best
13 Abrasion Resistance of Organic Coatings by the Taber Abraser ASTM D4060 No pass-fail criteria Abrasion Wheel H-18 Load Applied 1000 Grams Number Of Cycles:14000 Best
14 Locking strength ISO 10582:2017 Annex D Class 32, type I:≥1.5kN/m Long side(X): 7.6 kN/m Short side(Y): 6.3 kN/m Pass Best
15 Determination of dimensional stability and curling after exposure to heat ISO 23999 ASTM F3261 Length mean≦0.25％ Width mean≦0.25％ The curling≦2mm Length mean = -0.05％ Width mean = 0％ The curling = 0mm Best
16 Wear Layer Abrasion Resistance EN 13329 (S-42, 200 cycle change) IP≥2000 cycles 2400 cycles Abrasion Class: >AC3 Better
17 Density ASTM D2395 1.9-2.2g/cm³ 1.98g/cm³ Good
18 Phthalate tests (DBP/BBP/DEHP/DINP/ DNOP/DIDP) EN 14372:2004 N/A Free Best
19 Heavy Metal Content Analysis ASTM F963-16(Clause 8.3) Antimony < 60 ppm, Arsenic < 25 ppm, Barium < 1000 ppm, Cadmium < 75 ppm, Chromium < 60 ppm, Lead < 90 ppm, Mercury < 60 ppm, and Selenium < 500 ppm Free Best
20 Gloss Level (gu) ASTM D523 ±2gu < ±2gu Good
21 Resistance to Chemicals ASTM F925 0 - No change (----) 1 - Slight change 2 - Moderate change 3 - Severe change 0 No Change Good
22 Determining Resistance of Synthetic Polymers to Fungi ASTM G21 Rating 0: No Fungal Growth on Sample Rating 1: Trace of Growth (< 10% coverage) Rating 2: Light Growth (10-30% coverage) Rating 3: Medium Growth (30-60% coverage) Rating 4: Heavy Growth (60-100% coverage) Rating 0, No Fungal Growth on Sample Best
23 Smoke Density (Non-Flaming) ASTM E662 ≦450 291 Best
24 Smoke Density (Flaming) ASTM E662 ≦450 237 Best
25 Calculated Sound Transmission (STC) ASTM E90-09 (2016) ASTM E413-16 No pass-fail criteria 52 Good
26 Residual indentation ASTM F1700-13a & ASTM F1914-07(2011) Average value≦8% Individual value≦10% 0.40% Best
27 Determination of Indentation and Residual Indentation ISO 24343-1:2012 N/A 0mm Best
28 Static Load ASTM F970-17 N/A 0.04mm Good
29 Heat Stability of Resilient Flooring by Color change ASTM F1514 < 8.0 ΔE ΔE=0.67 Best
30 Light Stability of Resilient Flooring by Color change ASTM F1515 < 8.0 ΔE 0.29-0.46 ΔE Best
31 Static Coefficient of Friction ASTM C1028 ≥ 0.60 for dry surfaces ≥ 0.53 for wet surfaces Dry 0.69 Wet 0.56 with 50lbs load Good
32 Fire resistance EN 9239-1 EN ISO11925-2 EN 13501-1 Critical Fluxf≥8.0kW/m² Fs≤150mm within 20s Smoke≤750% minutes Bfl-S1 Better
33 Formaldehyde Emission ISO 17226-1:2008 N/A Free Best
34 Slip resistance EN13893 N/A Class DS Good
35 Slip resistance (oil-wet ramp test) DIN 51130:2014-02 N/A Critical angle of inclination: 14.8°Classification: R10 Pass Good
36 Large ball impact resistance NALFA/ANSI LF-01-2011 N/A No cracks or fractures occurred at the height of 2500mm Best
37 Static Electrical Propensity EN 1815:2016 method A ≦2kV 0.2kV Best
38 Surface Bond NALFA/ANSI LF-01-2011 N/A 1.14MPa Good
39 Thermal conductivity EN 12667:2001 N/A 0.154 W/(m.K) Best
40 Thermal Resistance EN 12667:2001 N/A 0.033(m2.K)/W Best
41 Colour Fastness EN ISO 105-B02:2014 N/A Grade 6 Good
© 2022 HomeLike All Rights Reserved.