(AR) - Generic Rigid Core Luxury Vinyl Running Line
5.0mm 20mil
Specifications Technical Data
Length 48.03 Width 7.09
Thickness 5mm Wear Layer 20mil
Finishing Wood Emboss Edge Description Micro Bevel
Sqft/Box 23.64 lb/Box 40.0
Box/Plt 55 Sqft/Plt 1300.2
lb/Plt 2230 Plt/FTL 19
Limited
Residential Warranty
Lifetime Limited
Commercial Warranty
15Years
No. Description Method Standard Result Performace Rating
1 Packing Appearance Internal Pallets/Cartons/Labels/Inserts/Bar Codes match customer order in quality and quantity, with neat appearance. Pass Better
2 Product Appearance Internal Material must match customer order. No print film folding, no rough bevel, no bevel with white line, no film scratch or breakage, no color difference, no wear layer bubbles, no impurities, no stains, no dents, no scratches, no broken corners, no fish eyes, no trash, no holes, no hair/ foreign subject, no overhang or uneven backpad, etc. Laser print of date/PO# and crew# present. Pass Better
3 Dimensions Length
Width
ASTM F1700 ± 0.40 mm
± 0.10 mm
0.03mm
0.02mm
Best
Best
4 Overall Thickness ASTM F1700 ± 0.10 mm 0.02mm Best
5 Squareness Length
Width
ISO 24342 ≤ 0.25 mm
≤ 0.25 mm
0.03mm
0.02mm
Best
Best
6 Straightness Length
Width
ISO 24342 ≤ 0.25 mm
≤ 0.25 mm
0.05mm
0.01mm
Best
Best
7 Stitching Gap (mm) EN13329 ≤ 0.10mm 0.02mm Best
8 Height Difference EN13329 ≤ 0.10mm 0.03mm Best
9 Wear Layer Thickness EN 429 ± 0.02 mm 0.01mm Best
10 Peel Strength of Adhesive Bonds ASTM D903 ≥5.5Lbs/Inch 10.3Lbs/Inch Best
11 Scratch Resistance EN 16094B > 2500g 4,000g Best
12 Micro-Scratch Resistance (A & B) EN 16094 MSR-B1 - B3 MSR-B2 Better
13 Coating Adhesion (Cross hatch) EN 16094B 5B 5B Best
14 Abrasion Resistance of Organic Coatings by the Taber Abraser ASTM D4060 No pass-fail criteria Abrasion Wheel H-18 Load Applied 1000 Grams Number Of Cycles:14000 Best
15 Determination of Locking Strength for Mechanically Assembled Panels ISO 24334 ≥2KN/M Long Side 5.6 KN/M Short Side 3.1 KN/M Good
16 Determination of Dimensional Stability and Curling after Exposure to Heat (6h - 176F) ISO 23999 ASTM F3261 Length mean ≦0.25% Width mean ≦0.25% Length mean =0.02% Width mean =0.04% Best
17 Wear Layer Abrasion Resistance EN 13329 (S-42, 200 cycle change) 0.3mm wear layer IP≥1,800 cycles; 0.5mm wear layer IP≥4,000 cycles. No abrasion through wear layer into print film upon cycle completion. Better
18 Density ASTM D2395 1.9-2.2g/cm³ 1.98g/cm³ Good
19 Phthalates CPSC-CH-C1001-09.4 GC-MS analysis each substance ≤ 50ppm < 1.0pppm Best
20 Heavy Metal Content Analysis ASTM F963 Antimony < 60 ppm, Arsenic < 25 ppm, Barium < 1000 ppm, Cadmium < 75 ppm, Chromium < 60 ppm, Lead < 90 ppm, Mercury < 60 ppm, and Selenium < 500 ppm All < 0.25ppm Best
21 Gloss Level (gu) ASTM D523 ±2gu < ±2gu Good
22 Resistance to Chemicals ASTM F925 0 - No change (----) 1 - Slight change 2 - Moderate change 3 - Severe change 0 No Change Good
23 Determining Resistance of Synthetic Polymers to Fungi ASTM G21 Rating 0: No Fungal Growth on Sample Rating 1: Trace of Growth (< 10% coverage) Rating 2: Light Growth (10-30% coverage) Rating 3: Medium Growth (30-60% coverage) Rating 4: Heavy Growth (60-100% coverage) Rating 0, No Fungal Growth on Sample Best
24 Smoke Density (Non-Flaming) ASTM E662 ≦450 291 Best
25 Smoke Density (Flaming) ASTM E662 ≦450 237 Best
26 Calculated Sound Transmission (STC) ASTM E90-09 (2016) ASTM E413-16 No pass-fail criteria 52 Good
27 Impact Sound Reduction (IIC) ASTM E492-09 ASTM E989-18 No pass-fail criteria 62 Good
28 Short-Term Indentation and Residual Indentation of Resilient Floor Covering ASTM F1914 ASTM F3261 ≤ 0.007 inch Surface Integrity: No puncture through wear layer/print film into rigid core. 0.002 inch No puncture through wear layer/print film into rigid core. Best
29 Static Load Limit ASTM F970 Max loading: 250psi Max residual indent: 0.005 inch 0.003 Inch @ 250psi Good
30 Heat Stability of Resilient Flooring by Color change ASTM F1514 < 8.0 ΔE 0.05-0.19 ΔE Best
31 Light Stability of Resilient Flooring by Color change ASTM F1515 < 8.0 ΔE 0.29-0.46 ΔE Best
32 Static Coefficient of Friction ASTM C1028 ≥ 0.60 for dry surfaces ≥ 0.53 for wet surfaces Dry 0.69 Wet 0.56 with 50lbs load Good