HomeLike Premium WPC Engineered Vinyl collection is 100% waterproof, scratchproof, pet friendly and uniquely designed for a choice of minimized sound, elevated style and excellent foot comfort with highly innovative & reinforced natural bevel technology which has superior stainproof performance comparing to micro bevel or painted bevel categories. Soft under-foot, yet waterproof and specially designed to endure heavy everyday foot traffic with extreme performance, Premium WPC Engineered Vinyl collection suits to high-traffic commercial spaces incl. bank lobbies, gyms and SPAs.
PU601 Bonita Springs
View In My Room
PU602 Gallatin Forest
View In My Room
PU603 Cherokee
View In My Room
PU604 Kobuk Valley
View In My Room
PU605 Smokey Mountain
View In My Room
PU606 Florence
View In My Room
PU607 Montana
View In My Room
PU608 Ventura
View In My Room
| Length | 59.84" | Width | 7.09" |
| Thickness | 8mm | Wear Layer | 20mil |
| Finish | EIR | Edge Description | Natural Bevel |
| Sqft/Box | 23.56 | lb/Box | 36.1 |
| Box/Plt | 65 | Sqft/Plt | 1531 |
| lb/Plt | 2345 | Plt/FTL | 18 |
| Limited Residential Warranty |
Lifetime | Limited Commercial Warranty |
15Years |
| Characteristics | Standards | Requirements | Result |
| TUV Premium Certification |
Belgian VOC regulation BREEAM Exemplary Level |
Refer to Standards | Pass |
| CE Certification | EN14041 | Refer to Standards | Pass |
| Floorscore Certification |
SCS-EC10.3-2014v3.0 | Refer to Standards | Pass |
| Castor Chair Resistance | NALFA LF 01-2011 Section 3.9 | N/A | After 25000 cycles,test specimens no visible damage |
| Dimensional Stability | ASTM F2199-09(2014) Heating temperature:65oC |
≤0.25% | MD:=-0.092% AMD:=-0.030% |
| Pentachlorophenol(PCP) | With reference to PD CEN/TR 14823:2003 |
N/A | Free |
| Formaldehyde Emission | EN 717-1:2004 | E1≤0.124mg/m³ | Free |
| Fire resistance | EN ISO 9239-1 EN ISO 11925-2 EN 13501-1:2010 |
N/A | Bfl-S2 |
| Impact insulation | ASTM E2179-09 | N/A | IICC-28=∆IIC 24 |
| Impact resistance | ASTM F1265-03a(2013) | N/A | No crack |
| Phthalate tests (DBP/BBP/DEHP/DINP/ DNOP/DIDP) |
REACH NO.1907/2006 | N/A | Free |
| Resistance to Heat | ASTM F1514-03(2013) | △E* shall not greater than 8.0 after7 days exposure to 70°C | △E*=0.66 |
| Residual indentation | ASTM F1914-07(2011) | Average≤8% Max≤10% | Average≤6.6% Max≤7.4% |
| Slip resistance | EN 13893:2003 | EN 14041:μ≥0.3 | μ=0.36 Class DS |
| Density | ASTM D792-13 Method A,Water at 23°C | N/A | 1.15g/cm³ |
| Squareness | ASTM F2055-17 | ≤0.25mm/305mm | Pass |
| Size | ASTM F2055-17 | A tolerance of ±0.4mm/305mm | Pass |
| Thickness | ASTM F386-17 | A tolerance of ±0.13mm | Pass |
| Thermal Conductivity | ASTM C518-10 | N/A | 0.114 W/(m.K) |
| Thermal Resistance | ASTM C518-10 | N/A | 0.062(m².K)/W |
