SC001 Mont Claire
View In My Room
SC002 Woodmont
View In My Room
SC003 Yorkshire
View In My Room
SC004 Carolina Fall
View In My Room
SC005 Monroe
View In My Room
SC006 Westchester
View In My Room
SC007 Windermere
View In My Room
SC008 Bellegrove
View In My Room
SC009 Sand Beach
View In My Room
SC010 Richlands
View In My Room
SC011 Berkley Hill
View In My Room
SC012 Sydney Bay
View In My Room
| Length | 48.03" | Width | 7.17" |
| Thickness | 4.5mm | Wear Layer | 12mil |
| Finishing | Emboss | Edge Description | Square |
| Sqft/Box | 28.68 | lb/Box | 43.2 |
| Box/Plt | 60 | Sqft/Plt | 1721 |
| lb/Plt | 2657 | Plt/FTL | 16 |
| Items | Standards | Requirements | Result |
| Floorscore Certification | SCS-EC10.3-2014v3.0 | Refer to Standards | Pass |
| GreenGuard Gold Certified | UL 2818 - 2013 Gold Standard for Chemical Emissions for Building Materials, Finishes and Furnishings | Refer to Standards | Pass |
| CE Certification | EN14041 | Refer to Standards | Pass |
| Fire resistance | EN 9239-1 EN ISO11925-2 EN 13501-1 |
Critical Fluxf≥8.0kW/m2 Fs≤150mm within 20s Smoke≤750% minutes |
Bfl-S1 |
| Phthalate tests (DBP/BBP/DEHP/DINP/ DNOP/DIDP) |
EN 14372:2004 | N/A | Free |
| Dimension stability | ASTM F2199-09(R2014) | ≦0.25% | Manufacturing direction:-0.046% Across-manufacturing direction:-0.009% |
| Determination of dimensional stability and curling after exposure to heat | ISO 23999:2012 | ≤0.25% The curling ≤ 2mm | MD:-0.05% AMD: 0% 0mm |
| Seam strength | EN 684:1995 | N/A | Ave.:360N/50mm Pass Min.:330N/50mm |
| Residual indentation (%) | ASTM F1700-13a & ASTM F1914-07(2011) |
Average value≦8 Individual value≦10 | 0.4 Pass |
| Determination of Indentation and Residual Indentation | ISO 24343-1:2012 | N/A | 0mm Pass |
| Resistance to chemicals | ASTM F1700-13a & ASTM F925-13 |
No more than a slight change in surface dulling,surface attack,or staining | No change in surface dulling,surface attack,or staining was detected |
| Heat stability | ASTM F1514-03(R2013) | △E*ab< 8 | △E*ab=0.67 Pass |
| Static loading | ASTM F970-17 | N/A | 0.04mm Pass |
| Soluble heavy metal contents test | ASTM F963-16(Clause 8.3) | N/A | Free |
| Large ball impact resistance | NALFA/ANSI LF-01-2011 | N/A | No cracks or fractures occurred at the height of 2500mm |
| Static Electrical Propensity | EN 1815:2016 method A | ≦2kV | 0.2kV |
| Determination of Impact Sound Insulation Class |
ASTM E492-09(2016) ASTM E989-06(2012) |
N/A | IIC=65 |
| Formaldehyde | ISO 17226-1:2008 | N/A | Free |
| Surface Bond | NALFA/ANSI LF-01-2011 | N/A | 1.14MPa Pass |
| Resilient floor covering Determination of peel resistance | EN ISO 24345:2012 | ≥54N/50mm | Longitudinal direction:95N/50mm Cross direction:95N/50mm |
| Thermal conductivity | EN 12667:2001 | N/A | 0.154 W/(m.K) |
| Thermal Resistance | EN 12667:2001 | N/A | 0.033(m2.K)/W |
| Colour Fastness | EN ISO 105-B02:2014 | N/A | Grade 6 |
| Dimensional stability | ISO 23999:2008 | N/A | Average: X Direction: 0.02% Pass Y Direction: -0.06% |
| Curling | ISO 23999:2008 | N/A | Average: 0.5mm Pass |
| Residual indentation | ISO 24343-1:2007 | N/A | Average: 0.02mm Pass |
| Locking strength | ISO 10582:2017 Annex D | Class 32, type I:≥1.5kN/m |
Long side(X): 7.6 kN/m Short side(Y): 6.3 kN/m Pass |
| Resistance to staining | ISO 26987:2008 | N/A | Index 0: Not affected Pass |
| Scratch Resistance | EN 16094B | ＞2,500g | 3,500g |